Universal Car Carbon Fiber Shifter Shift Knob
Universal Car Carbon Fiber Shifter Shift Knob Manual Transmission Gear Stick Shift Shifter Lever Knob
Manual gear universal type
Product accessories: 1 head + 1 set of rubber bushings (8MM + 10MM + 12MM) + 3 screws + special wrench 1
Product Size: Installation hole diameter 8 mm-12 mm, hole depth 4 cm, suitable for most cars. With three rubber sleeves, there is always a suitable for your car.
installation method
1. Remove the original car head
2. Remove the aluminum alloy sleeve at the bottom of this gear head
3. Take the rubber sleeve for the size of the lever
4. Put the rubber sleeve into the shift lever
5. Put the gear head directly into the shift lever (note, first put the aluminum alloy cover on the gear lever)
6. Turn the small screws up
7. Hexagon screw tightened
8. Tighten the aluminum cover
